Cisco SPA8000 8-Port IP Telephony Gateway

Available Stock (QTY: 5+)

$ 324.99 Inc-Gst

 

1 Year Nationwide Warranty

Extended warranties available

Prices Exclude Shipping

Cisco SPA8000 8 x FXS IP Telephony Gateway

 

Product Overview

The Cisco® SPA8000 8-Port IP Telephony Gateway (Figure 1) is a full-featured analog telephone adapter (ATA) for small businesses, providing enhanced communication services via a broadband connection to the Internet.

The Cisco SPA8000 features eight RJ-11 FXS ports to connect analogue telephones to IP-based data networks and includes a single multiport RJ-21 50-pin connector, offering an alternative connection choice when deploying the telephony gateway in varied environments. The device also has one 10/100BASE-T RJ-45 Ethernet interface to connect to either a router or a multilayer switch.

Solid in design, the Cisco SPA8000 is an affordable solution that is ideally suited for use in business and consumer voice over IP (VoIP) service offerings, including call centres and multi dwelling environments. Customers can protect and extend their investment by continuing to use their existing analogue telephones and teleconferencing equipment.

Installed by the end user and remotely provisioned, configured, and maintained by the service provider, each Cisco SPA8000 converts voice traffic into data packets for transmission over an IP network and uses common standards for voice and data networking for reliable voice and fax operation.

 

High-Density Voice Solution

Don’t let analogue phones come between you and Internet telephony. Part of Cisco Small Business Voice Gateways and ATAs, the SPA8000 8-Port IP Telephony Gateway allows for connections between eight analogue telephones and an IP-based data network, providing small businesses with enhanced communication services through a broadband Internet connection.

Ideal for multi-dwelling environments or business settings such as call centres, the SPA8000 converts voice traffic and faxes into data packets for IP transmission.

 

Highlights

• Connect up to eight analogue devices to your IP network, such as fax, standard phone, or overhead paging system
• Continue to use existing analogue phones on your VoIP system
• Excellent for IP Centrex deployments, providing remote provisioning and support for dynamic
• In-service software upgrades
• Clear, high-quality voice communication, using standards based voice codec’s and quality of service

 

Additional features of the Cisco SPA8000 include:

• Eight RJ-11 FXS ports to connect analogue telephones to IP-based data networks
• A single multiport RJ-21 50-pin connector, offering an alternative connection choice
• One 10/100 Base-T RJ-45 Ethernet interface to connect to either a router or multilayer switch
• Toll-quality voice and carrier-grade feature support
• Large-scale deployment management
• Strong security with reliable, encryption-based methods for communication, provisioning, and servicing

Features

Toll-quality voice and carrier-grade feature support: The Cisco SPA8000 delivers clear, high-quality voice communication in diverse network conditions. Excellent voice quality in a demanding IP network is achieved via the advanced implementation of standard voice coding algorithms.

The SPA8000 is interoperable with common telephony equipment such as voicemail, fax, private branch exchange (PBX), and interactive voice response systems.

Large-scale deployment and management: The Cisco SPA8000 enables service providers to provide customized services to their subscribers. It can be remotely provisioned and supports dynamic, in-service software upgrades. A highly secure profile upload saves providers the time and expense of managing and preconfiguring or reconfiguring customer premises equipment (CPE).

Ironclad security: Cisco understands that security for both end users and service providers is a fundamental requirement for a solid, carrier-grade telephony service. The Cisco SPA8000 supports highly secure, encryption-based methods for communication, provisioning, and servicing.

 

Telephony Features

Eight voice ports (RJ11) for analogue phones or fax machines

Impedance agnostics: eight configurable settings

Call waiting, cancel call waiting, call waiting caller ID

Caller ID with name and number (multinational variants)

Caller ID blocking

Call forwarding: no answer, busy, all

Do not disturb

Call transfer

Three-way conference calling with local mixing

Message waiting indication-visual and tone based

Call return

Call back on busy

Call blocking with toll restriction

Delayed disconnect

Distinctive ringing-calling and called number

Off-hook warning tone

Selective/anonymous call rejection

Touch-tone phone keypad configuration with interactive voice response (IVR)

Fax: G.711 pass-through or real-time fax over IP via T.38

T.38 support is dependent on fax machine and network/transport resilience

 

SPECIFICATIONS

 

Data networking

MAC address (IEEE 802.3)

IPv4 (RFC 791), upgradable to v6 (RFC 1883)

Address Resolution Protocol (ARP)

DNS A record (RFC 1706), SRV record (RFC 2782)

Dynamic Host Configuration Protocol (DHCP) client (RFC 2131)

DHCP server (RFC 2131)

Point-to-Point Protocol over Ethernet (PPoE) client (RFC 2516)

Internet Control Message Protocol (ICMP) (RFC 792)

TCP (RFC 793)

User Datagram Protocol (UDP) (RFC 768)

Real Time Protocol (RTP) (RFC 1889, 1890)

Real Time Control Protocol (RTCP) (RFC 1889)

Differentiated Services (DiffServ) (RFC 2475), type of service (ToS) (RFC 791, 1349)

VLAN tagging (IEEE 802.1p)

Simple Network Time Protocol (SNTP) (RFC 2030)

Upload data rate limiting-static and automatic

Quality of service (QoS)-voice packet prioritization over other packet types

MAC address cloning

Port forwarding

Session Initiation Protocol (SIP) channels support both UDP and TCP transport

VPN pass-through with IP Security encapsulating security payload (IPsec ESP),

Point-to-Point Tunnelling Protocol (PPTP), and Layer 2 Tunnelling Protocol (L2TP)

 

Voice gateway

SIP v2 (RFC 3261, 3262, 3263, 3264)

SIP proxy redundancy-dynamic via DNS SRV, A records

Reregistration with primary SIP proxy server

SIP support in Network Address Translation (NAT) networks (including Serial Tunnel [STUN])

Secure (encrypted) calling via pre-standard implementation of Secure RTP

Codec name assignment

G.711 (a-law and µ-law)

G.726 (16/24/32/40 kbps)

G.729 A

G.723.1 (6.3 kbps, 5.3 kbps)

Dynamic payload

Adjustable audio frames per packet

Fax tone detection pass-through

Fax pass-though (using G.711)

Dual-tone multi frequency (DTMF): in-band and out-of-band (RFC 2833) (SIP info)

Flexible dial plan support with inter-digit timers and IP dialling

Call progress tone generation

Jitter buffer-adaptive

Frame loss concealment

Full-duplex audio

Echo cancellation (G.165/G.168)

Voice activity detection (VAD) with silence suppression

Comfort noise generation (CNG)

QoS (Ethernet port upstream bandwidth control, physical port, MAC address, application)

Attenuation/gain adjustments

Flash hook timer

Message waiting indicator (MWI) tones

Visual message waiting indicator (VMWI) via frequency shift keying (FSK)

Polarity control

Hook flash event signalling

Caller ID generation (name and number)-Bellcore, DTMF, European Telecommunications Standards Institute (ETSI)

Music on hold client

Streaming audio server-up to 10 sessions

System dial-on-demand routing (DDR) synchronous dynamic RAM (SDRAM)-16 MB

System flash ROM-4 MB

 

Security

Password-protected system reset to factory default

Password-protected administrator and user access authority

Provisioning/configuration/authentication:

HTTPS with factory-installed client certificate

Authentication: Extensible Authentication Protocol Transport Layer Security (EAP-TLS),

EAP Tunnelled Transport Layer Security (EAP-TTLS), and Protected EAP (PEAP)

SIP TLS

Up to 256-bit Advanced Encryption Standard (AES) encryption

 

Provisioning, administration, and maintenance

Web browser administration and configuration via integral web server

Telephone keypad configuration with interactive voice prompts

Automated provisioning and upgrade via HTTPS, HTTP, Trivial File Transfer Protocol (TFTP)

Asynchronous notification of upgrade availability via NOTIFY

Nonintrusive, in-service upgrades

Report generation and event logging

Stats in BYE message

Syslog and debug server records

Per-line and purpose configurable syslog and debug options

 

Physical interfaces

8-port standard FXS voice ports (RJ-11)

RJ-21 (50-pin Telco connector) multiport voice connection

1 WAN 100BASE-T RJ-45 Ethernet Port (IEEE 802.3)

Reset button

 

Subscriber line interface circuit (SLIC)

Ring voltage: 40–90 Vpk configurable

Ring frequency: 20–25 Hz

Ring waveform: trapezoidal

Maximum ringer load: 5 ringer equivalence numbers (RENs)

On-hook/off-hook characteristics:

On-hook voltage (tip/ring): -46 ~ -56V

Off-hook current: 18–25 mA

Terminating impedance: 600 ohm resistive or 270 ohm + 750 ohm

150 nF complex impedance

Frequency response 300–3400 Hz

Return loss (600 ohm, 300–3400 Hz) up to 20 dB

Insertion loss (1 Vrms at 1 kHz) 3–4 dB

Total harmonic distortion (THD) (350 mV peak at 300 Hz) up to 3%

Idle channel noise-72 dB (typical)

Longitudinal balance 55 dB (typical)

Off-hook threshold (line seizure) Rdc < 1000 ohm

On-hook threshold (line release) Rdc >10000 ohm

Rdc DC supervisory range Rdc > 450 ohm

 

Regulatory compliance

FCC (Part 15 Class B), CE, ICES-003, C-Tick certification, Restriction of Hazardous Substances (RoHS), UL

 

Power supply

Switching type (100–240V) automatic

DC input voltage: 12V DC at 3.0A max.

Power adapter: 100–240V, 50–60 Hz AC input

 

Indicator lights/LEDs

Power, Ethernet, Voice Status, Phone 1 through 8

 

Documentation

Quick installation, user, and configuration guides

Administration guide-service providers only

Provisioning guide-service providers only

 

Environmental

 

Dimensions W x H x D

6.69 x 1.54 x 8.66 in. (170 x 39 x 220 mm)

 

Weight

2.85 lb (1.30 kg)

 

Operating temperature

32° to 113°F (0° to 45°C)

 

Storage temperature

-13° to 185°F (-20° to 85°C)

 

Operating humidity

10% to 90% noncondensing, operating and non-operating

 

Storage humidity

10% to 90% noncondensing, operating and non-operating

 

Package Contents

Cisco SPA8000 8-Port IP Telephony Gateway

12V power adapter

RJ-45 Ethernet cable

Quick installation guide

 

Product Warranty

1-year limited hardware warranty with return to factory replacement.

90-day limited software warranty.